Home > 3D Printer and CNC parts > Stepper Drivers >

SureStepr SD8825 Stepper driver
SureStepr SD8825 Stepper driver


 
SureStepr SD8825 Stepper Driver v1.1
Price: $9.99

Stock Status:(Out of Stock)

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: SD8825


Version:


Qty:  

  
Description
 
The SureStepr SD8825 is a bi-polar stepper motor driver based on the robust Texas Instruments DRV8825 chips. They are simple to use and operate using an indexer (DIR/STEP) interface to move the stepper motors. The SD8825 is a drop-in replacement for Pololu style footprint drivers including the A4988, A4983 and Stepsticks. See user guide for pin out compatibility.

The SSD8825 has a distinct design feature not found on similar stepper drivers, the components are mounted on the underside of the PCB with the top exposed for easy heat sink mounting. The driver chip has a heat pad at the bottom of case that allows heat to be drawn away from it. By having the parts at the bottom you can now attach a heatsink that is thermally connected to the heat pad thereby cooling the chip better compared to attaching the heat sink on top of the IC,

The SD88825 comes pre-soldered with special 0.1” pitch headers that are taller than what is commonly available. This gives more space at the bottom to protect the parts from shorting into something and allows air to flow more freely on the underside of the board.

The SD8825 drivers are known for their robustness and very good thermal management due to its unique design layout. These are better performers compared to other DRV8825 drivers out there.
See user guide before attempting to install.

Version Selection:

Standard: For use with boards without digital pot controller available. RAMPS, RADDS, and most third party controllers. The Azteeg controllers can use these drivers as well but will work with the digipot version if needed.

Digipot: For use with Azteeg controllers if using the digital pot Vref adjustment feature. Can be used on the X3, X3 PRO, X5 mini V3 and X5 GT

Features and Specs:
  • Made with 4 Layer 2oz copper RoHS( v1 2 Layer)
  • 1, 1/2, 1/4, 1/8, 1/16 and 1/32 Microstepping
  • Up to 2.5 Amps drive current
  • Chip has built in logic supply
  • Bottom mounted parts for better heat dissipation
  • Comes with Heat sink
  • Easy to use DIR/Step insterface
  • Over current, Over temperature and short circuit protection
  • Fault pin and decay pin available on separate header pins
  • Vref accessible for external current limit control
  • Motor Voltage: 45V max
Documentation: