Home > Controllers >

Kinetica G2C 3D Printer Motion Controller
Kinetica G2C 3D Printer Motion Controller

Alternative Views:

Price: $79.00

Stock Status:In Stock

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: KG2C

Network Module:

Upgrade your Creality Ender/CR-10 v1 3D printer to RepRapFirmware the easy way.

The Kinetica G2C is a direct replacement for the Creality motherboard on Ender 3,4 and 5 and the CR-10 V1 series of printers that have a single extruder. Uses 4 Trinamic TMC2209 Stepper Drivers.

The Kinetica G2C is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. It runs on RepRapFirmware and is based on the DUET 2 Maestro and DUET 2 Wifi designed by Think3DPrint3D and Esher3D.

Configuration is easier using a text based config file loaded on the SD card, no need to upload firmware every time you make a change. Just edit the config file from your PC then reboot the board with the new config and you're done.

Use either USB, Wifi or Ethernet to communicate with your machine. Full featured web control page to control, print and monitor your machine remotely. Supports Ender/CR-10 stock LCD, RRD Full Graphic Smart LCD and the PanelDue TFT touch display .

Compact and powerful all in one solution.

Requires an SD card to operate and store configuration files.

  • 32BIT ATMEL ATSAM4S8C 120MHZ ARM processor.
  • Runs on RepRapFirmware
  • Supports Wifi or Ethernet Networking
  • 4 Trinamic TMC2209 drivers
  • 1 High Current Mosfet for Heat bed control
  • 1 Mosfet for Hotend control
  • 2 FAN Mosfets and 1 case fan (always on)
  • 4 End stops and 3 Thermistor inputs
  • Supports Ender/CR-10 Stock LCD, RRD Graphic Smart LCD and PanelDue
  • Wide input high efficiency switching Power supply
  • Micro SD card slot built in
  • High current Terminal blocks
  • Protected analog inputs

What's in the box:
  1. Kinetica G2C Controller Board with RepRap Firmware
  2. Wifi Module
  3. LCD adapter board for stock Ender/CR-10 LCD
  4. External Antenna with U.FL pigtail
  5. Ethernet Module (if selected as add-on)

Support files:

Support files and documentation