Azteeg X5 GT 32bit Motion Controller

Azteeg X5 GT 32bit Motion Controller

Product Code: AX5GT

Price: $110.00

Stepper Drivers None 4pcs SD8825 w/ Heatsink [Add $26.00] 4pcs SD6128 w/ Heatsink [Add $32.00] 4pcs SD5984 w/ Heatsink [Add $28.00] 4pcs SD2224 w/ Heatsink [Add $28.00] 4pcs SD2209 w/ Heatsink [Add $32.00] 5pcs SD2209 w/ Heatsink [Add $40.00] 5pcs SD2224 w/ Heatsink [Add $35.00] 5pcs SD6128 w/ Heatsink [Add $40.00] 5pcs SD5984 w/ Heatsink [Add $35.00] 5pcs SD8825 w/ Heatsink [Add $32.00]

Bigfoot Drivers None 3pcs Bigfoot BSD109A [Add $27.00] 4pcs Bigfoot BSD109A [Add $36.00] 5pcs Bigfoot BSD109A [Add $45.00] 3pcs Bigfoot BSD2100 [Add $27.00] 4pcs Bigfoot BSD2100 [Add $36.00] 5pcs Bigfoot BSD2100 [Add $45.00]

Endstops None 3 Mechanical Endstops [Add $4.50] 4 Mechanical Endstops [Add $6.00] 6 mechanical Endstops [Add $9.00]

Thermistors None

Thermocouple None 1 input board with Type K thermocouple wire [Add $11.00] 2 input board with two Type K thermocouple wires [Add $20.00]

Please correct the following:

Stock Status: (Out of Stock)

Availability: Usually Ships in 1 to 2 Business Days

Description


The Azteeg X5 GT is a 32 bit ARM based Motion controller for 3D printers, CNC Machines and Laser cutters. The X5 GT runs on Smoothieware firmware and is based on Smoothieboard by the awesome Arthur Wolf. The X5 GT uses the powerful 32bit, 120Mhz NXP LPC1769 ARM chip capable of faster calculations for faster and smoother movements.

Configuration is easier using a text based configuration file loaded on the SD card, no need to upload firmware every time you make a change. Just edit the config file from your PC then reboot the board with the new config and you're done.

The X5 GT features the new Bigfoot stepper driver footprint which is twice the size of the regular drivers. This footprint allows higher current drivers to run on the X5 GT for demanding CNC applications. It also allows use of more advanced SPI controlled drivers. The X5 GT will accept both Bigfoot and Pololu style drivers.

Recommended Stepper Drivers for X5 GT (with digipot current control)


• SD5984 - Based on allegro's new A5984 chips. Quieter and smoother than most drivers, 1/32 microstepping, 2 Amps 40V max. With Adaptive Percent Fast Decay feature.
• SD6128 - Based on Sanyo's THB6128 chips. Quiet and smooth like the SD5984, 1/128 microstepping, 2A 35V max.
• SD8825 - Based on Ti DRV8825. Robust and runs cool. 1/32 microstepping, 2.5A 40V max. Good choice for heftier motors
• Bigfoot BSD109A - 3A 50V. 1/32 microstepping. Good choice for CNC applications
• Bigfoot BSD2100 - Based on TMC2100. Quiet and smooth. Jumpers to modify settings.
• Bigfoot BSD2660 - Based on TMC2660. SPI setup and configuration including current limit and microstepping. 3A 30V. For 3D printing and CNC applications. Super quiet and smooth. 1/256 microstepping.

Most 3rd party drivers will work with the X5 GT but current limit adjustment for the driver needs to be done manually using the trimpot. Panucatt stepper drivers has extra pins to make use of the digipot feature.



---

Features:


• 32BIT NPC LPC1769 120MHZ ARM processor
  
• Compatible with Smoothieware firmware by Arthur Wolf
• Isolated USB using Analog Devices iCoupler technology
• Accepts Bigfoot Stepper Driver profile
• Accepts Standard Pololu style divers with digipot control for Panucatt drivers.
• 1 High Current Mosfet for Heat bed control
• 2 Mosfet for Hotend control
• 2 FAN Mosfets
• 5 Stepper Driver slots
• 6 Endstops with ESD/EMI protection
• 3 analog thermistor inputs ( Over voltage protected)
• Wide input high efficiency 5V switching power supply
• Wide input high efficiency 12V switching power supply (dedicated)
• Micro SD card slot built in
• Terminal Block motor connectors
• Vertical connectors for Endstops and thermistors.
• High current input connector can handle up to 30 Amps
• 4 Layer, 2oz outer layers PCB
• 0-10V control for VFD drives
• 5V Servo output (level shifted)
• 30V max for main input
• 35V max for stepper driver input




---


Expansion Boards:



• Ethernet board - Provides LAN connectivity to the X5 GT. Activates Smoothie's built in web control.
• Stepper Driver expansion(Experimental) - Adds 2 stepper drivers, 2 thermistor inputs and 2 Mosfet outputs for a 4 extruder setup.
• Thermocouple add-on board - Adds 1 or 2 thermocouple inputs to the X5 GT. Kit comes with Type-K glass braid Thermocouple wires
• Wifi board - In development




---



Support Files:

Get support files here



• © Copyright 2024 Panucatt Devices

  Powered by Volusion

  Go to main site